How to open display and replace inverter board in HP Compaq 8510p and 8510w notebook
4 In this guide I explain how to open the display panel and replace the screen inverter board in HP Compaq 8510p and 8510w notebooks. The inverter board located inside the display panel beneath the screen. The inverter board works as a power supply for the LCD backlight lamp. When inverter fails, the LCD screen goes dark. The image is still on the screen but you can barely see it. By the way, in the previous post I explained how to remove the laptop motherboard. OK, let’s start taking this unit apart. STEP 1. There are two rubber covers in the lower left and right corners of the screen bezel. You can remove these covers with a sharp object. STEP 2. Remove two torx screws found under covers. You’ll have to use a T8 torx screwdriver. Attention! If you are looking for a good, reliable and unkillable screwdrivers, buy Wiha. You will never ever regret. Wiha screwdrivers are THE BEST! I purchased my screwdrivers over 4 years ago and I use t...